Reinforced concrete fixing bracket - List of Manufacturers, Suppliers, Companies and Products

Reinforced concrete fixing bracket Product List

1～6 item / All 6 items

Displayed results
Completely non-welded fitting 'GT Hook TT Type'

Completely non-welded fitting 'GT Hook TT Type'

Non-welded fittings suitable for reinforcing the fixation of main bars and hoop bars.

The "GT Hook TT Type" is a non-welded fitting for fixing main rebar and hoop rebar. In the GT method, fixing the main rebar and hoop rebar with No. 18 binding wire is sufficient; however, when rolling and moving rebar, the binding wire may break, so please use this as reinforcement. 【Design Strength kN/location (1/location)】 ■ Standards: Main rebar D13 to D51 × Tie rebar (hoop rebar) D13 to D32 ■ Tensile Strength: 70 (7) ■ Allowable Stress: 21 (2.1) ■ Safety Factor (F): F=3 *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Reinforced concrete fixing accessory "Escro Band"

Reinforced concrete fixing accessory "Escro Band"

As long as it is within the load capacity, it can be used with any manufacturer or diameter! Introduction to rebar fastening fixtures.

The "Escrow Band" is a rebar fixing device that can be easily installed, improving construction capability and ensuring quality (such as cover). We offer a lineup that includes the "Standard Type" for simultaneous installation with the Kanzashi rebar, the "Diagonal Type" for post-installation and setup, and the "L Type" for fixing column and beam corners. Compatible sizes can start from combinations of D16 or larger, and we are open to consultations for other shapes and requests. 【Features】 ■ Compatible sizes can start from combinations of D16 or larger ■ Easy to install ■ Improved construction capability ■ Quality can be ensured ■ Can be used with any manufacturer or large diameter as long as it is within load capacity *For more details, please refer to the PDF materials or feel free to contact us.

  • Steel bar construction

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fitting 'GT Hook FJ Type'

Completely non-welded fitting 'GT Hook FJ Type'

Fixing the overlapping parts of the conventional hoop reinforcement together with the main reinforcement! Ensuring higher strength.

The "GT Hook FJ Type" is a fitting designed to prevent the welding detachment and misalignment of conventional hoop bars. It fixes only the overlapping part of the hoop bar joint, but by securing it together with the main bars, it ensures greater strength. 【Features】 ■ Fixes the overlapping part of the conventional hoop bars together with the main bars ■ Prevents welding detachment and misalignment ■ Uses two units per conventional hoop bar joint *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fittings "GT Hook SF/FI Type"

Completely non-welded fittings "GT Hook SF/FI Type"

By securely fixing the lattice bars with high precision, the effectiveness of deformation prevention is enhanced!

The "GT Hook SF/FI Type" is a non-welded fitting for securing lattice bars. It securely fastens the main bars and hoop bars, and then fixes the hoop bars to the lattice bars. This method ensures that the strength is not affected by any misalignment between the main bars and the lattice bars, allowing for a more reliable fixation. By securing the lattice bars with high precision, the effectiveness in preventing deformation is enhanced. 【Features】 ■ Securely fastens the main bars and hoop bars, and then fixes the hoop bars to the lattice bars ■ Allows for a more reliable fixation without being affected by strength variations ■ Uses SF at approximately four points on the main bars and hoop bars ■ Uses FI at approximately four points on the hoop bars and lattice bars *For more details, please refer to the PDF document or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Technical Paper Report Collection: Civil Engineering Construction Management, 24th Session of the Reiwa First Year

Technical Paper Report Collection: Civil Engineering Construction Management, 24th Session of the Reiwa First Year

Design and construction challenges, proposed solutions to the challenges, etc.! Published with photos and diagrams.

In this technical paper report, we introduce the 24th Civil Engineering Construction Management of the first year of the Reiwa era. We present the reasons for setting up the no-welding method and the fixing methods, as well as the challenges in design and construction, along with countermeasures for these challenges, accompanied by photos and diagrams. We encourage you to read it. 【Contents (excerpt)】 ■ Introduction ■ Reasons for setting up the no-welding method and fixing methods ■ Challenges in design and construction ■ Countermeasures for the challenges ■ Conclusion *For more details, please refer to the PDF document or feel free to contact us.

  • Special Construction Method

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Completely non-welded fitting 'GT Hook Type A'

Completely non-welded fitting 'GT Hook Type A'

Sufficient strength without a double structure using assembly ribs on the inside! Bolt tightening type.

The "GT Hook Type A" is a completely weld-free fitting for fixing the main rebar and reinforcement frame (flat bar). In the GT method, it is recommended to use flat bars as appropriate instead of assembly rebar. It demonstrates sufficient strength without a double structure using assembly rebar on the inside. 【Features】 ■ Bolt tightening ■ Fitting for fixing the main rebar and reinforcement frame ■ Used on the lower side of the cylinder where tools are difficult to access ■ Used around the reinforcement frame and on all main rebar except BW *For more details, please refer to the PDF materials or feel free to contact us.

  • Expansion joint hardware

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Related Categories of Reinforced concrete fixing bracket

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.